Kyocera DF-760 Manuel D'utilisation page 23

Tray A
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
2
Remove the jammed paper.
3
Open the tray C and front cover.
4
Turn the conveyor knob (D2) to the left to feed the
paper along to enable easy removal.
5
Close Tray C and the front cover, and re-install the
finisher back into position on the machine.
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the conveyor
section to Tray A.
1
Lift open Tray B and remove the jammed paper.
English
21