Rockwell Automation Allen-Bradley MSR45E Manuel Utilisateur page 9

The undersigned, representing the manufacturer
Rockwell Automation, Inc.
2 Executive Dr.
Chelmsford, MA 01824
USA
Herewith declare that the Products:
Product identification (brand and
catalogue number/part number):
Product Safety Function
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with
the installation instructions contained in the product documentation:
2006/42/EC
2004/108/EC
and that the standards and/or technical specifications referenced below have been applied:
EN 61496-1:2004 + A1:2008
IEC 61496-2:2006
EN ISO 13849-1:2008
EN 61508 Parts 1-7:1998-2000
EN 954-1:1997
EN 50178:1997
EN 62061:2005
EN 60204-1:2006
EN 61000-6-4:2007
EN 61000-6-2:2005
Manufacturer:
Signature
Name: Daniel L. Nachtigall
Position: Supv – Product Certification Engineering
Date: 01-Mar-2011
Document Control Number: SEN-0394-B-EN
Module d'extension de relais de sécurité MSR45E – Manuel utilisateur
EC Declaration of Conformity
and the authorised representative established within the
Community
Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
MSR4x Safety Base / MSR4xE Expander Controller Modules
Allen-Bradley 440R-P and 445L-1 Series
(reference the attached list of catalogue numbers)
The MSR4x safety base control devices and the MSR4xE extension modules
can be used in applications up to Safety Category 4 (EN 954-1)/ SIL3/SIL
CL3 (EN 61508 / EN 62061) and PL e (EN ISO 13849-1).
Machinery Directive
EMC Directive
Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
Safety of machinery – Electro-sensitive protective equipment – Part 2:
Particular requirements for equipment using active opto-electronic protective
devices (AOPD's)
Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
Functional safety of electrical/electronic/programmable electronic safety-
related systems
Safety of machinery – Safety related parts of control systems – Part 1: General
principles for design
Electronic equipment for use in power installations
Safety of machinery – Functional safety of safety-related electrical, electronic
and programmable electronic control systems
Safety of machinery – Electrical equipment of machines – General
requirements
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emission standard for industrial environments (Class A)
Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards –
Immunity for industrial environments
Authorised Representative in the Community:
Signature
Name:
Position:
Date:
Viktor Schiffer
Engineering Manager
08-Mar-2011
1 / 2
7