Publicité
Les langues disponibles
Les langues disponibles
User Manual
5
Connecting and disconnecting devices
5.1
Connecting devices by bluetooth
1.
Switch the ON/OFF switch
The SoundOne automatically starts the Bluetooth mode.
2.
Switch on the Bluetooth function of your mobile device.
3.
Search "SoundOne" in the device list and connect it.
If your mobile device requires a password, enter "0000" .
After successfully connecting, a short beep tone sounds.
The SoundOne is now ready for playing music.
5.2
Connecting devices by Bluetooth via NFC
1.
Switch the ON/OFF switch
The SoundOne automatically starts the Bluetooth mode.
2.
Switch on the NFC function of your mobile device.
3.
Hold the NFC sensor of your mobile device to the SoundOnes' NFC sensor.
Your mobile device automatically starts the Bluetooth mode and requires confirming of the connection.
4. To confirm the connection request with the soundOne.
After successfully connecting, a short beep sounds.
The SoundOne is now ready for playing music.
5.3
Disconnecting the Bluetooth connection
>> Press both buttons
5.4
Connect and disconnect devices by audio cable
>> C onnect the supplied audio cable to the stereo input jack of the SoundOne and your mobile
device.
>> Switch the ON/OFF switch
The Bluetooth mode is deactivated.
>> Disconnect all cable connections after use and to reactivate Bluetooth function.
5.5
Taking the device out of operation
1.
Disconnect all Bluetooth and cable connections when not in use.
2.
Switch the ON/OFF switch
3. Disconnect the power supply unit from mains.
4. Read chapter "Maintenance, Care, Storage and transport".
6
Playing music
6.1
Set the volume
>> Adjust a low volume level at your mobile device.
>> Set the volume by buttons
6.2
Play and Pause
>> P lay and pause music with the
device.
14
to ON.
to ON.
and
simultaneously for disconnecting.
to ON.
to OFF.
/
of the SoundOne or via your mobile device.
button of the SoundOne or via control center of your mobile
Publicité
Chapitres
