Disconnecting A Bluetooth Connection; Listening To Fm Stations; Selecting An Fm Station - Yamaha MCR-B142 Mode D'emploi

Masquer les pouces Voir aussi pour MCR-B142:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
• Hold down
on the remote control or SOURCE on this unit.
• Turn the system off.
• Turn off the Bluetooth setting of the other component.
When you connect an iPod touch/iPhone/iPad via Bluetooth, the Bluetooth connection may be disconnected if you switch the audio source to
iPod or USB while an iPod/iPhone/iPad is connected.

Selecting an FM station

To listen to the FM station, connect the antenna as described in "Connecting the speakers and antenna" (P. 2).
1
2
Display information (remote control only)
If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the
following order.
Displaying Radio Data System information
If you press DISPLAY on the remote control while Radio Data System information is being received, the information shown
on the front panel display will be switched in the following order.
PS (Program Service)
PTY (Program Type)
RT (Radio Text)
CT (Clock Time)
Reception status
Preset number and frequency

LISTENING TO FM STATIONS

Preset number and frequency
* Example of reception status indication.
TUNED/STEREO: A strong FM stereo broadcast is being received.
TUNED/MONO:
A monaural FM broadcast is being received (even if the FM
broadcast is stereo, reception will be monaural if the signal is weak).
Not TUNED:
No broadcast is being received.
If the signal transmission of the Radio Data System station is too weak, this unit may not be
able to receive Radio Data System information completely. In particular, RT (Radio Text)
information uses a lot of bandwidth, so it may be less available compared to other types of
information.
1
Press the RADIO source button to switch the
audio source to FM.
2
Tune FM stations
Automatic tuning: Press and hold TUNING
Manual tuning: Press TUNING
If you tune to a station manually while receiving FM, the sound
will be monaural.
Reception status*
LISTENING TO FM STATIONS
/
.
/
repeatedly.
13
En

Publicité

Table des Matières
loading

Table des Matières