FEATURES
This model is equipped with the following features:
LOW WATER INDICATOR (31,36)
A red warning light signals that the water tank (10) needs to be refilled. If you wish to continue steam cleaning,
see the "Refilling with Water" instructions.
VARIABLE PRESSURE CONTROL (32, 33)
With the steam pressure regulator, it is possible to select the steam pressure that you wish to use during your cleaning
from minimum, medium and maximum.
WET / DRY VACUUM
To activate the vacuum, press the main vacuum button (2) on the vacuum head (1). Activate the vacuum with
the vacuum activation button (35) on the hose handle. Make sure the vacuum is properly connected to the
steam cleaner behind the unit (22). You can use the vacuum independently from the steam cleaner.
DETERGENT INJECTION (38)
To release a jet of detergent in the steam, press the detergent injection button (38) and hold the steam release trigger (40)
at the same time. Do not hold for more than 5 seconds at a time.
You can regulate the detergent flow by pressing on the
STEAMREADY™ INDICATOR (30)
Lets you know when the steam cleaner is operating at optimal pressure and ready to use.
(28) to increase or
(29) to decrease detergent.
en
10