Identifying Parts And Controls - Sony SDM-X202 Mode D'emploi

Identifying parts and controls

See the pages in parentheses for further details.
Front of the LCD display
Side view of the LCD display
Rear of the display stand
A 1 (Power) switch and 1 (power) indicator
(pages 9, 19, 23)
This switch turns the monitor on when the 1 (power)
indicator lights up in red. To turn the monitor off, press this
switch again.
If the 1 (power) indicator does not light up, press the MAIN
POWER switch (8).
B MENU button (page 12)
This button turns the menu screen on and off.
C M/m and 2 (volume control) buttons (pages 12, 18)
These buttons are used to select the menu items and make
adjustments, and also display the "Volume" menu to control
the volume.
D OK button (page 12)
This button activates the selected menu item and adjustments
made using the M/m buttons (3).
E INPUT button and INPUT1/INPUT2 indicators
(page 11)
This button switches the video input signal between INPUT1
and INPUT2 when two computers are connected to the
monitor, and the corresponding indicator (INPUT1 or
INPUT2) lights up.
F ECO button (page 19)
This button is used to reduce the power consumption.
G Stereo speakers (page 18)
These speakers output the audio signals as sound.
H MAIN POWER switch (page 9)
This switch turns the monitor's main power on and off.
I Back cover (page 7)
Remove this cover when you connect cables or cords.
J Headphones jack (page 18)
This jack outputs audio signals to the headphones.
9
q;
US
(continued)
5