dirna Bergstrom Bycool Slim Fit Iveco Euro 6 Instructions De Montage page 24

SLIM FIT
EN
Air conditioning for vehicles
Detailed instructions on the installation
of power supply cables
Connect the power cable to the unit, secure it to the roof with mounts using adhesive and
1
flanges (A); pass the cable along the back of the cabin through the inlet pipe, securing it
with mounts using adhesive and flanges (B); next, with the cabin tilted, pass the cabling
underneath and secure it to the original screws with nylon clamps and with mounts with
adhesive and flanges (C); then run it to the battery cutout (D) and the earthing connexion
(E) using the original cabling and pipe run (inside the exhaust pipe protection (F)) and
secure with flanges.
power supply
A
cables
B
24