Déclaration De Conformité Ce - Lovibond Pm 630 Mode D'emploi

Photomètre
Masquer les pouces Voir aussi pour Pm 630:
Table des Matières

Publicité

3.6
Für das nachfolgend bezeichnete Erzeugnis / For the following mentioned product
Bezeichnung / Name,
Modellnummer / Model No.
wird hiermit erklärt, dass es den grundlegenden Anforderungen entspricht, die in den nachfolgend bezeichneten Harmonisierungsrechtsvorschriften festgelegt sind: / it is
hereby declared that it complies with the essential requirements which are determined in the following harmonisation rules:
RICHTLINIE 1999/5/EG DES EUROPÄISCHEN PARLAMENTS UND DES RATES vom 9. März 1999 über Funkanlagen und
Telekommunikationsendeinrichtungen und die gegenseitige Anerkennung ihrer Konformität
DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity
Angabe der einschlägigen harmonisierten Normen, die zugrunde gelegt wurden, oder Angabe der Spezifikationen, für die die Konformität erklärt wird: / Information of
relevant harmonised standards and specifications on which the conformity is based:
Fundstelle / Reference
Harmosisierte Normen / Harmonised Standards
ETSI EN 301 489-1 V1.9.2
ETSI EN 301 489-17 V2.2.1
ETSI EN 300 328 V1.8.1
DIN EN 61010-1
Weitere angewandte technische Spezifikationen (z.B. nicht im EU-Amtsblatt veröffentlicht) / Further applied technical specifications (e.g. not published in the Official Journal
of the EU)
DIN EN 61326-1
Bluetooth Modul: EN 60950-1
Bluetooth Modul: EN 300 328 V1.7.1
Diese Erklärung wird verantwortlich für den Hersteller oder seinem Bevollmächtigten / This declaration is made for and on behalf of the manufacturer or his representatives
Name:
Anschrift / Address:
abgegeben durch / declared by
Name, Vorname / First name:
Funktion / Function:
Bevollmächtigte Person im Sinne des Anhangs II Nr. 1. A. Nr. 2, 2006/42/EG für die Zusammenstellung der technischen Unterlagen / Authorized person for
compilation of technical documents on behalf of Annex II No. 1. A. No. 2, 2006/42/EC:
Name:
Anschrift / Address:
Dortmund
Ort, Datum / Place and date of issue
Diese Erklärung bescheinigt die Übereinstimmung mit den so genannten Harmonisierungsrechtsvorschriften, beinhaltet jedoch keine Zusicherung von Eigenschaften. / This
declaration certifies the conformity to the specified directives but contains no assurance of properties.
Zusatzangaben / Additional details:
Diese Erklärung gilt für alle Exemplare, die nach den entsprechenden Fertigungszeichnungen - die Bestandteil der technischen Unterlagen sind - hergestellt werden. Weitere Angaben über die Einhaltung obiger Fundstellen enthält die
beigefügte Konformitätsaussage unterstützende Begleitdokumentation. / This statement is valid for all copies which were manufactured in accordance with the technical drawings which are part of the technical documentation. More
details about compliance of the above mentioned references includes the supporting documentation.
Doc file:
172
Déclaration de conformité CE
Konformitätserklärung mit gefordertem Inhalt gemäß EN ISO/IEC 17050-1
Supplier's declaration of conformity in accordance with EN ISO/IEC 17050-1
EU-Konformitätserklärung / EU-Declaration of Conformity
Dokument-Nr. / Monat.Jahr:
Document No. / Month.Year:
Ausgabedatum/
Edition
ETSI EN 301 489-1 V1.9.2 (2011-09), Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for
2011-09
radio equipment and services; Part 1: Common technical requirements
ETSI EN 301 489-17 V2.2.1 (2012-09), Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for
2012-09
radio equipment; Part 17: Specific conditions for Broadband Data
Transmission Systems
Radiated Spurious Emissions, Electromagnetic Compatibility and Radio
Spectrum Matters (ERM); Wideband Transmission Systems; Data transmission
equipment operating in the 2.4 GHz ISM band and using spread spectrum
2012-06
modulation techniques; Part 2: Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und
Laborgeräte - Teil 1: Allgemeine Anforderungen (IEC 61010-1:2010 + Cor.
2011-07
:2011)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil
2013-07
1: Allgemeine Anforderungen (IEC 61326-1:2012)
2006+A11:2009+
Einrichtungen der Informationstechnik - Sicherheit - Teil 1: Allgemeine
A1:2010+A12:20
Anforderungen
11
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques; Harmonized EN
covering essential requirements under article 3.2 of the R&TTE Directive
Tintometer GmbH
Schleefstr. 8-12, 44287 Dortmund, Germany
Dr. Grabert, Elmar
Technische Leitung / Director Technology
Corinna Meier
c/o Tintometer GmbH, Schleefstr. 8-12, 44287 Dortmund
15.09.2015
MD 610 PM 630 AL410 DokNr_4__9_2015
4
/
MD 610 PM 630 AL410 , 214025, 214070, 4214025
Titel / Title
Rechtsgültige Unterschrift / Authorized signature
9.2015
PM630_3 03/2018

Publicité

Table des Matières
loading

Table des Matières