DigiSender X7 Mode D'emploi page 11

STEP 5
Using the DigiSender® X7
The DigiSender® X7 is designed to be
simple to use once set up.
STEP 1
Switch on the source equipment such as your
satellite receiver or DVD player.
STEP 3
Select the correct source device using the
supplied remote control pointed at the
DigiSender® receiver - see opposite.
Please read this instruction manual carefully prior to installation
The supplied remote control can be
used to switch between sources, such
as Satellite/Cable, DVD and VCR.
STEP 2
Select the SCART channel on the second television
using the televisions remote control. Look for a
button labelled AUX, AV, VIDEO, VCR or
STEP 4
DIGISENDER
REMOTE
CONTROL
Use your original source equipment remote control
to control what channel you watch or your DVD
player or VCR.
DG440 - DigiSender® X7
SOURCE
REMOTE
CONTROL
ENGLISH
2nd TV
REMOTE
CONTROL
.
Page 11