Increase / Reduce The Temperature During Operation; Switch The Programme Resp. The Temperature Range During Operation; Switch Off The Appliance; Empty The Fondue Pot - Rommelsbacher F 1200 Mode D'emploi

Increasing/reducing the temperature during operation
• Depending on the ingredients quantity, the temperature can be reduced or increased.
NOTE: When your fondue session is drawing to a close and the liquid, cheese or chocolate has become
considerably less, it is mostly necessary to re-adjust the temperature control to a lower setting.
Switching the programme/temperature range during operation
• Depending on the quantity of ingredients, it may happen that the temperature range of the selected
programme is not sufficient to keep the contents of the fondue pot at the preferred temperature.
• Then we recommend to change the programme resp. temperature range in order to achieve the desired
results.
• By a clever switching between the 3 temperature ranges, you can decide yourself about the necessary
temperature for your preparation.
Example: You have selected the programme "Fondue" with temperature level "1", the content is
cooking highly instead of only simmering. Switch to programme "Cheese" and select the temperature
level "4" or "5" and continue.
Switching the appliance OFF
Emptying the fondue pot
• Allow the fondue pot and the remaining contents to cool down before emptying it.
• Use pot cloths to remove the fondue pot from the base unit.
• Empty the pot carefully.
Note: Fats and oils can be used several times. Fill the fats/oils into a suitable container and store them
in a suitable place for the next use.
Switching the appliance off completely
• By actuating the touch key "+", the temperature can be increased.
• By actuating the touch key "-", the temperature can be reduced.
• If no further setting is made, the appliance starts operation automatically after
5 seconds.
 On the temperature scale, the pilot lamps light up continuously according to
the selected temperature level.
• For switching off, activate the touch key "On/Standby".
 Activating the touch key is confirmed by a signal tone.
• The appliance is in standby mode now.
For a safe switch-off, pull the power plug after each use!
23