S&P TERMOTECH - 1250 Manuel D'installation page 14

Return the connection cable to its place and fasten in place with the safety
screw.
Step 3:
Fit the assembly in its place and fasten with the clamp.
6 - MAINTENANCE AND CLEANING
Maintenance and cleaning operations must always be carried out with
the appliance disconnected from the power supply.
Do not use petrol, aggressive solvents etc. for cleaning the radiant panel, use
only a damp cloth.
7 - WITHDRAWAL FROM SERVICE AND RECYCLING.
When no longer in use, even for a short period, it is advisable to store the
appliance in a dry, dust free place.
Help us protect the environment by eliminating the packaging in agreement with
the national legislation in force on waste disposal.
Do not discard appliances bearing this label with non-classified waste.
They must be collected and discarded in the required way .
Old appliances must also be scrapped in an appropriate fashion, in agreement
with the local regulations and by-laws.
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE
PRODUCED DUE TO NON-COMPLIANCE OF THESE WARNINGS .
14