S&P TERMOTECH - 1250 Manuel D'installation page 10

4 - CHARACTERISTICS AND TECHNICAL INFORMATION
GENERAL DESCRIPTION.
The TERMOTECH model is a heating panel for both domestic use and industrial
use. It is essentially designed to heat areas in offices, businesses, laboratories
and other rooms. Thanks to its flat design, it blends in well with the decoration in
any of these settings.
TECHNICAL DATA
Classification against risk of electric shock:
Degree of protection
TERMOTECH-1250
TERMOTECH-1750
* Surface temperature refers to an ambient temperature of 20ºC
TECHNICAL STANDARD APPLIED
* The radiant panel has been developed following the rules laid down by the Low
Voltage Directives
UNE-EN 60335-1:2002
UNE-EN 60335-2-30:2004
5 - INSTALLATION INSTRUCTIONS
PRELIMINARY OPERATIONS AND WARNINGS
Consult this manual on use and maintenance carefully before using the
appliance.
Unpack the appliance carefully and ensure that the panel is in a perfect
state. Should it present any defect or damage do not install it or try to repair it.
Contact your usual supplier or
IP 40
Temperature Power
Surface areal *
100ºC 1250
135ºC 1750
S&P
technical service immediately.
Class I
Current Voltage: (V)
(W) (A)
5,4
7,6
10
Dimensions
(+/-10) (mm)
230 600x18000x60
230 600x18000x60
Colour
RAL
9010
9010