Safety Information; General Information; Assembly - BASETech 1179257 Notice D'emploi

5. Safety Information

Read these operating instructions with care before installation and commissioning.
The guarantee/warranty will expire if damage is incurred resulting from non-compliance with the
operating instructions! We do not assume any liability for consequential damage!
We do not assume any liability for property damage and personal injury caused by improper use or
non-compliance with the safety instructions! In such cases the warranty/guarantee is voided.
a) General Information
• The unauthorised conversion and/or modification of the product is prohibited for safety and approval
reasons (CE). Never dismantle the product.
• The product is not a toy. Devices that are operated with mains voltage have no place in the hands of
children. Therefore, be particularly careful when children are present.
• The product is constructed pursuant to protection category II.
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• If you have reason to assume that safe operation is no longer possible, disconnect the product immedi-
ately (turn out associated fuse or deactivate circuit breaker, deactivate associated FI protection switch)
and secure it against inadvertent operation. Then have the product inspected by a specialist.
It can be assumed that safe operation is no longer possible if:
- the product is visibly damaged
- the product does not work or not work properly (flickering light, smoke or burnt smell, audible crackling,
discolouration of the product or adjacent surfaces)
- the product has been stored under unfavourable conditions
- it has been subjected to heavy stress during transport
• If you have questions which remain unanswered by these operating instructions, please contact us or
another expert.
b) Assembly
• Operate the product only when it is stationarily installed. Operation of the product without stationary
installation is not permitted for reasons of safety.
• Install the product so that it cannot be reached by children.
• The product is intended for installation and use in dry indoor rooms. It must not become damp or wet.
• Do not use the product inside of rooms or in bad ambient conditions where flammable gases, vapours or
explosive dust may be or are present! There is a danger of explosion!
23