König Electronic HAV-MCS30 Mode D'emploi page 9

Programmed Playback
It is possible to program a selection of up to 32 tracks for playback.
Individual tracks can be programmed more than once.
1. After loading a disc, Press the PROG / CLK ADJ (6, 38) button in stop
mode.
PROGRAM and - - PR01 will show in the display.
2. Press the / /TUNING  or / /TUNING  (20, 35)
buttons repeatedly to select the desired track number.
3. Press PROG / CLK ADJ (6, 38) button to confi rm the fi rst programmed
track.
- - PR02 now shows in the display and waiting for next programming.
4. Repeat steps 2 and 3 to store further tracks.
5. When programming is complete, press the  PLAY/PAUSE (14, 47) button to begin
playback of the selected tracks.
Clear Program (Resume Normal Playback)
Press the STOP (15, 32) button twice in the program mode, or open the CD door (21), or change
to another mode to erase the programmed tracks.
MP3 OR WMA DISC OPERATION
Normal Playback
After loading a MP3 or WMA disc, press the  PLAY/PAUSE (14, 47) button to start playback.
The folder number, MP3 or WMA, and current track number indicates in the display.
Pause control
To temporarily pause during CD playback press the  PLAY/PAUSE (14, 47) button. The disc
playback will pause and the elapsed track time will fl ash in the display. Press the  PLAY/
PAUSE (14, 47) button again to resume playback.
Skip track and high-speed music search
The procedure for skipping and searching through tracks is the same as previously described
in the CD operation section of this manual.
Using numerical buttons
You can use the Numerical 0-9 (49) buttons to directly select folders and tracks to play.
1. In stop mode
Press "0" fi rst, the display indicates as Fig. A. Then input the desired folder number. For the
folder number 1-9, you must press "0" fi rst. After selecting the folder number "02" , for example,
the display indicates as Fig. B. Press "0" again, the display indicates as Fig. C. Then input the
desired fi le number of the selected folder. For fi le numbers 1-9, you must press "0" fi rst. After
selecting the fi le number "18" the display indicates as Fig. D. After 2-3 seconds, the selected
fi le 18 in folder 2 will be played automatically.
Fig. A Fig. B Fig. C
9
Fig. D