König Electronic HAV-MCS30 Mode D'emploi page 11

Programmed Playback
It is possible to program a selection of up to 32 fi les for playback. Individual
tracks can be programmed more than once.
1. In stop mode, after a CD containing MP3 or WMA tracks is loaded,
Press the PROG / CLK ADJ (6, 38) button. In stop mode, PROGRAM
and - - PR01 will show in the display.
2. Press the FOLDER- (51) or FOLDER+ (41) repeatedly to select the
desired folder number.
3. Press the / TUNING or / TUNING (20, 35) buttons repeatedly to select
the desired fi le number in the selected folder.
4. Press the PROG / CLK ADJ (6, 38) button to confi rm the fi le in the fi rst
program location.
- - PR02 will show in the display and ready for the next fi le to be programmed.
5. In order to add more tracks to the program repeat step 2 and 3 until the memory is full.
6. When programming is complete, press the PLAY/PAUSE (14, 47) button begin playback of
the selected folders/fi les.
Clear Program (Resume Normal Playback)
Press the  STOP (15, 32) button twice in the program mode, open the CD door (21), or change
to another mode to erase the programmed tracks.
iPod® OPERATION
This unit is equipped with a dock system to allow you to connect your iPod® and enjoy the
sound via the speakers. The dock system is able to adapt to fi t most types of currently available
iPod®, by using one of 5 different sized dock adaptors supplied. Please note that as new
iPod® models become available, new dock adaptors may be required. This unit can also
charge the iPod® battery when connected via the dock.
To fi t a dock adapter
Select the appropriate dock adaptor for your iPod®. Take care to use the correct one, as this
will ensure that the iPod® is held securely in place.
1. Gently press the iPod® dock adapter into the dock at the top of the unit.
2. Carefully place your iPod® into the dock. (The iPod® must not be in a case or "Skin" )
To remove/replace a dock adapter
First remove your iPod®, and then grip the dock adapter and pull gently upwards.
11