König Electronic HAV-MCS30 Mode D'emploi page 4

Speaker connection
1. To insert the speaker cable, push down the terminal lever of the
RIGHT Speaker Terminal (27) and LEFT Speaker Terminal (28).
2. Please ensure the cables are connected into the speaker terminal
with the correct polarities. Connect the left speaker to terminals L
and the right speaker to terminal R.
Headphone connection
You can use headphones (not included) to listen in privacy. Insert
the headphones 3.5mm plug into the phones socket (12). Use
corresponding adaptors (specialist shops) if you have different plugs.
The speakers will cut off automatically when the headphones are
being used.
Subwoofer connection
An external subwoofer speaker can be connected to the socket marked "Subwoofer" (26) on
the rear of the main unit.
VIDEO OUTPUT connection
The video output from certain iPod® s can be send to a TV using the
VIDEO OUT socket (24). The accompanying audio signal can be send
using the AUDIO OUT sockets (25).
A standard AV lead with yellow, red and white coloured plugs (not
supplied) can be used for this purpose. Please note that the sockets on
your TV must be confi gured to accept input rather than output signals to
enable this feature to work correctly.
AUX connection
1) Connect a 3.5mm stereo jack lead to the AUX IN socket (11) and the other end to your
preferred device.
2) Press the AUX button on the remote control (43) "AUX" will show in the display.
3) Select the play function on the auxiliary device and the sound output can then be heard from
the Micro
Main connection
1. Unwind the AC Power Cord (29) completely.
2. Insert the plug into any convenient AC outlet.
3. As soon as the unit has been connected with the main voltage, parts of the unit are in
operation due to the standby function. Turn off the unit completely before pulling the main
plug out of the AC outlet.
4
Red
Black
Red