How To Use: Pyrolytic Cleaning - AEG BPB355061M Notice D'utilisation

Masquer les pouces Voir aussi pour BPB355061M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND CLEANING
Step 3
Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4
Install the shelf supports in the
opposite sequence.

12.4 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Turn off the oven and wait
until it is cold.
Step 1
C1 - Light cleaning
C2 - Normal cleaning
C3 - Thorough cleaning
Step 2
Step 3
Step 4
70/160
Before the Pyrolytic Cleaning:
Remove all accessories.
Pyrolytic Cleaning
Option
- press to select the cleaning programme.
- press to start the cleaning.
After cleaning, turn the knob for the heating functions to the off posi‐
tion.
1
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Enter menu: Cleaning
Duration
1 h 30 min
2 h 30 min
2
.
1 h

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bps355061m

Table des Matières