How To Clean: Cavity Embossment; How To Remove: Shelf Supports - AEG BPB355061M Notice D'utilisation

Clean the cavity after each use. Fat accumulation or other residue may cause
fire.
Moisture can condense in the oven or on the door glass panels. To decrease
the condensation, let the oven work for 10 minutes before cooking. Do not store
the food in the oven for longer than 20 minutes. Dry the cavity with a soft cloth
Everyday Use
after each use.
Clean all accessories after each use and let them dry. Use a soft cloth with
warm water and a mild detergent. Do not clean the accessories in a dishwash‐
er.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

12.2 How to clean: Cavity embossment

Clean the cavity embossment to remove limestone residue after cooking with steam.
Step 1
Pour: 250 ml of white vinegar
into the cavity embossment.
Use maximum 6% vinegar
without any additives.
For the function: SteamBake clean the oven for every 5 - 10 cooking cycles.

12.3 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 2
Let the vinegar dissolve the
limestone residue at the ambi‐
ent temperature for 30 mi‐
nutes.
CARE AND CLEANING
Clean the cavity with warm
water and a soft cloth.
Step 3
69/160