Electrolux ERC 07002W8 Mode D'emploi page 13

Problem
The appliance does
not cool sufficiently
The appliance cools
too hard
The appliance does
not cool at all
The appliance is noisy
Inasmuch as the advice does not lead to result, call the nearest brand-mark service.
GB
Possible cause
The thickness of the frost is
greater than 4-5 mm on the
cooling plate.
Thermostatic control is set too
low.
Too many foods to be cooled
were put in.
Very warm foods were put in.
Door is not shut properly.
There is no inside cool air
circulation.
The thermostatic control is set
too high.
Plug is not connected to the
mains socket properly.
There is no voltage in the mains
socket.
Thermostatic control is in „0"
position.
The appliance is not supported
properly.
GB
Solution
Defrost the appliance.
Set higher position.
Put fewer foods to be cooled.
Put foods max.
temperature.
Check if the door is shut.
Provide inside cool air circulation.
Set lower position.
Check if the connection is proper.
Check if there is voltage.
Check setting of thermostatic
control.
Check if the appliance stands
stable.
electrolux 13
at room