Publicité
Les langues disponibles
Les langues disponibles
Select language from the
programming menu
CONTROL
UNIT SETUP
CONTROL UNIT
Setting the access
PIN (default 1234)
Setting the LCD
CONTROL UNIT
contrast.
LCD CONTRAST
Accepted values 0...
15
Load/Save
CONTROL UNIT
configuration from/to
USB STORAGE
USB
CONTROL UNIT
Setting the
SERIAL SPEED
serial port speed
CONTROL UNIT .
Reading the installed
software version
Default Reset:
CONTROL UNIT
restore the unit to the
RESET DEFAULT
factory settings
From the "CONTROL UNIT" menu, it is possible to change the menu language, set the user code, modify
the LCD contrast, save the SAF-HD unit configuration in a USB pen drive, load the configuration from the
USB pen drive, change the communication speed of the serial port (we recommend 57600 bps), check the
software version of the SAF-HD unit, and reset the unit to the default settings.
5.8 CONTROL UNIT MENU
CONTROL UNIT
LANGUAGE
LANGUAGE
Italiano
LANGUAGE
English
PIN
YES
PIN
PIN
NO
LCD CONTRAST
0
LCD CONTRAST
15
USB
STORAGE
LOAD
USB STORAGE
SAVE AS
SERIAL SPEED
115200 bps
SERIAL SPEED
9600 bps
SOFTWARE VERSION
SOFTWARE
version
VERSION
Default Reset?
YES=V / NO=X
To select
Enter code
****
Code disabiled
To select
LOAD
Enter USB
Press DOWN to
YES=V / NO=X
scroll down the
SAVE AS
Enter USB
Configuration1
YES=V / NO=X
To select
32
Italiano
Francais
Espanol
Portuguese
Deutsch
English
Re-enter code
****
LOAD
Configuration1
files
SAVE AS
Saving OK
9600 bps
19200 bps
38400 bps
57600 bps (default value)
115200 bps
5.8
To c
lang
Ger
5.8
To e
CO
NO
•
•
•
•
5.8
co
c
SAV
To s
Wh
the
alon
SAF
Publicité
