CABASSE STREAM BASE Notice D'installation page 29

DLNA (WLAN) WIRELESS CONNECTION TO THE WIFI NETWORK
THERE ARE 2 SOLUTIONS TO CONNECT
STREAM BASE TO THE WIFI NETWORK:
1
WPS CONNECTION: push the WPS button of the wireless router for
2 seconds or more and push the WPS button of the STREAM BASE
within around 2 minutes (check for precise delays in the router's
manual). The connection is completed when the blue LED "WIFI"
is on. Now go to page 41 to install the Cabasse StreamCONTROL
application.
2
EASY WI-FI CONNECTION WITH THE CABASSE STREAMCONTROL APP with a smartphone or tablet
wi-fi connected to the domestic network.
a) Install the Cabasse Stream App on an Android or Mac tablet or smartphone from "Play Store" or "App
Store".
b) Switch the STREAM BASE on or press the reset button if already on. Activate the Wi-Fi in the "settings"
application mode of the smartphone or tablet.
c) Select STREAM BASE among the available items and launch the connection.
d) Launch the Cabasse StreamCONTROL app. Once connected to STREAM BASE, select STREAM BASE in
the available wifi networks list and follow the set-up instructions.
Note: from step b), you can open the Cabasse StreamCONTROL application and follow the
instructions of the online guide, which is launched automatically when connecting for the first
time.
e) The WIFI blue LED on the back of STREAM BASE flashes for around 30 seconds.
f) The WIFI blue LED stops flashing and remains on: press on "Close This Window". STREAM BASE is now
ready to play all the shared audio files in your network as well as all the web radios proposed by vTuner.
29