CABASSE STREAM BASE Notice D'installation page 24

SETTING UP
1
1- Place the Stream BASE under the TV, either on a cabinet or a shelf able to support the weight of
both Stream BASE and TV , or on a shelf under the TV but close to it, for instance if the base of the
TV is too wide to fit on top of the Stream BASE. All connections achieved, be sure to center the base
of the TV on tne top of the BASE.
2- Make sure there is a space of at least 1" (2.5 cm) between the wall and the rear of the BASE. The
ventilation openings must remain clear to provide a proper cooling of the system.
3- Connect the Stream BASE with the TV using of the 2 inputs available. We recommend the optical
digital input for best performance:
- OPTICAL IN: use the supplied optical cable to connect it to the
TV Audio OUT . Be sure to remove both the caps on both ends
of the cable. Firmly push the plugs into the connectors until
hearing or feeling a click.
- AUX IN: if the TV is not fitted with an optical output, connect
the RCA analog output of the TV with an RCA-mini-jack cable
(not supplied). If there is no RCA output, use the headphone
output and a Jack-mini-jack cable (not supplied).
TURNING OFF THE TV SPEAKERS
2
Turn on the TV, go to the TV menu and select Audio, Sound, or Speaker Settings. Look for the menu
item that allows you to turn off the TV speakers. If there is no setting for turning the TV speakers off,
adjust the TV volume to its lowest setting.
3
ENABLING DIGITAL AUDIO OUT
If there is no TV sound when on phase 5, look for the menu item that allows to enable the digital
audio output and select the optical setting.
PLUG & PLAY WITH TV
CAUTION! The TV on top of the Stream BASE must
not weight more than 35 kg (77 lbs) and have
bases no wider than 63 cm (25"), and no deeper
than 27 cm (10.6").
Do not place a CRT type TV on the Stream BASE
24