Conglom Transform QL114 Manuel De L'utilisateur page 11

Maintenance
CARTRIDGE REPLACEMENT
- Turn off the water supply to the faucet .
- Remove water indicator (7) and screw (8) with an hex key.
- Remove the handle (9).
- Screw off the cartridge cover (6).
- Remove the washer (5).
- Pull out the cartridge (4) by hand, make sure gasket (3) and spring (2) remain in the faucet. Click in
the new cartridge .
- Place the washer (5) back in its original position.
- Screw on the cartridge cover (6). Do not over tighten.
- Place the handle (9) over top and secure the screw (8) with an hex key, reinsert the water
indicator (7).
- Turn the water supply to the faucet back on .
- Operate the faucet to make sure everything works correctly and check for leaks .
Please contact cs@conglomkb .com or 1-877-333-0098 for further assistance .
Handle (9)
Screw (8)
Water indicator (7)
Cartridge cover (6)
Washer (5)
Cartridge (4)
Gasket (3)
Spring (2)
Faucet body (1)
11
CONGLOMKB .COM