Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Gallagher 3E3264 M1000 Energizer User Manual
Step 3. Connect the fence
a)
Connect the energizer's red output ( ) terminal to the fence using
Underground Cable (G627). Remove 5cm (2") of plas c coa ng from one end
of the cable. Unscrew the red (FENCE) terminal and insert the wire through the
terminal slot. Screw the terminal closed, ensuring the wire is fi rmly clamped.
b)
A ach the other end of the cable to the fence using a Joint Clamp (G603).
For instruc ons on fence installa on see the Gallagher Power Fence™ Manual or go
to www.gallagherams.com
Step 4. Turn the Energizer On
a)
Plug the energizer into a power outlet and switch ON.
b)
Check that the Power On LED on the front of the energizer is green.
c)
Re-a ach the orange terminal cover.
Permanent Fence
1
8
7
2
1
Energizer
2
Earth stake
3
Strain insulator
4
Post insulator
GREEN
To Earth System
3
9
5
Wire ghtener
6
Warning sign
7
Earth (Green)
8
Live (Red)
M1000
RED
To Fence
5
4
12
9
10
11
12
11
6
10
Cut out switch
Joint clamps
Strain post
Line post
5
Publicité
Table des Matières
