Vimar Eikon 20446 Notice Technique page 37

• HEATING OR AIR CONDITIONING.
Used to select the timer-thermostat operating mode, choosing
from heating or air conditioning .
Press key P until the required mode is displayed (symbol
blinking); using key "" "" set the required operation, then
press the OK key to confirm .
• TEMPERATURE SCALE.
Used to set the unit of measurement of the temperature, choos-
ing from between degrees Celsius (°C) and degrees Fahrenheit
(°F) .
Press key P until the required mode is displayed (symbol °C or
°F blinking); using key "" "" set the required scale, then press
the OK key to confirm .
ENGLISH - 33