Operation - Vimar Eikon 20446 Notice Technique

8. OPERATION.

Make the electrical connections, install the appliance and then
insert the batteries .
If the relay is on, the flame symbol
propeller symbol in the summer .
• SWITCH-OFF.
Used to switch off the system .
Press key F until the required mode is displayed (OFF blinking),
then press the OK key .
• TIMED SWITCH-OFF.
Used to switch off the system for a set time .
Press key F until the required mode is displayed (symbols
OFF blinking); using key "" "" set the time (max 99 hours),
then press the OK key .
N.B. It is not possible to access the Timed Switch-Off mode if
the appliance is already OFF or in another timed status .
is shown in the winter or the
and
• ANTIFREEZE.
Used to set a minimum temperature level to avoid damage to
pipework or prevent the temperature from falling below a certain
safety level .
Press key F until the required mode is displayed (symbol
blinking); using key "" "" set the temperature (from 4 to
15 °C), then press the OK key .
N.B. It is not possible to access the Antifreeze mode if the appli-
ance is on Air Conditioning .
• MANUAL.
Used to set switching the heating or air-conditioning on and off
manually .
Press key F until the required mode is displayed (symbol
ing), then press the OK key .
blink-
ENGLISH - 29