Auto Weight Defrost - Panasonic NN-E486MM Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Auto weight defrost

With this feature you can defrost frozen food according to the weight. Select the category
and set the weight of the food. The weight is programmed in grams. For quick selection, the
weight starts from the most commonly used weight for each category.
Auto
Select the desired auto
weight defrost program.
The auto program number
appears in the display.
Program
1. SMALL
PIECES
Auto
1 press
2. BIG PIECE
Auto
2 presses
3. BREAD/CAKE
Auto
3 presses
„ Notes
1.
When defrosting time is over 60 minutes the time will appear as hours and minutes.
2.
The shape and size of the food will determine the maximum weight the oven can
accommodate.
3.
Allow standing time to ensure the food is completely defrosted.
Set the weight of the frozen food
by using the plus/minus weight
selection control buttons.
The weight counts up/down in
10 g increments.
Min./Max.
Weight
Small pieces of meat, escallop, sausages, minced meat,
200 g - 1000 g
steak, chops, fish fillets (each 100 g to 400 g). Turn and
shield at beeps. Allow to stand for 15 min to 30 mins.
Big pieces of meat, whole chickens, meat joints. Whole
chickens and meat joints will require shielding during
defrosting. Protect wings, breast and fat with smooth
600 g - 1600 g
pieces of aluminum foil secured with cocktail sticks. Do
not allow the foil to touch the walls of the oven. Standing
time of 1 to 2 hours should be allowed before cooking.
Turn and shield at beeps.
For bread (whole, slices, rolls) and cakes. Cream cakes
and iced cakes are unsuitable for this program. Place the
bread or cake on a large plate or shallow pyrex dish. Press
100 g - 600 g
auto weight defrost three times and turn at beep. Allow
bread to stand for 10 min (white light bread) to 30 min
(dense rye bread). Cut large loaves in half during standing
time.
Instructions
17
EN
Press Start.
Remember to stir or
turn the food during
defrosting.

Publicité

Table des Matières
loading

Table des Matières