Télécharger Imprimer la page

Makita CL070D Manuel D'instructions page 7

Masquer les pouces Voir aussi pour CL070D:

Publicité

Les langues disponibles

Les langues disponibles

NOTE:
Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
Always be sure to check that both filter and pre-
filter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, filter and prefil-
ter are not loaded correctly. Reload them cor-
rectly to rectify problem.
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
► 1. Prefilter
Example 2: Only filter has been loaded (no prefilter)
1
► 1. Filter
Example 3: Filter has been loaded in a peeled back state
► 1. Filter
1
1
Example 4: Prefilter's securing lip is not firmly locked
into groove of cleaner housing
2
► 1. Groove of cleaner housing 2. Prefilter 3. Securing
lip
OPERATION
CAUTION:
To connect attachments, such as nozzle,
twist-insert attachment in direction of arrow to
ensure secure connection during use. To dis-
connect attachment, twist-extract also in direc-
tion of arrow.
If attachment is twisted in the opposite direction,
when being connected or disconnected, capsule
may become loose.
► 1. Capsule
CAUTION:
Keep away end of your hair, scarf, shawl, etc.
from the exhaust vents. They may be entangled
in the motor and cause injury.
7 ENGLISH
3
1
1

Publicité

loading

Ce manuel est également adapté pour:

Cl100d