Knick ProLine P 44000 Mode D'emploi page 30

Mounting and Electrical Connection
41
17 18 19 20
The device comes ready for 2-wire-connection to Pt100:
with jumper from 17 to 18 and from 19 to 20.
For 4-wire connection of the Pt100, you must remove the jumpers.
30
43
31 32
ProLine P 44000 D3
Terminal Assignments:
17 Input + Current
18 Input + Voltage
19 Input – Voltage
20 Input – Current
31 Power supply
32 Power supply
41 Output + Current
43 Output – Current
M 3.5 connecting screws with
self-releasing terminal housing
Conductor cross-section
max. 1 x 4 mm 2
2
1 x 2.5 mm stranded with sleeve,
min. 1 x 0.5 mm
with sleeve
AC/DC
AC/DC
solid or
2 solid or stranded