Wurth Master DCN 3264 Notice D'utilisation page 12

GB
It is only possible to work safely
with this tool if the user reads
these operating instructions and
the safety instructions in their
entirety, fully understands the
instructions and strictly follows
the information given.
All persons in the workplace must
wear suitable ear protection and
safety glasses while the tool is used.
The sound pressure emitted by the
tool can cause harm to the hearing.
Flying parts and sparks may cause
injury to the eyes.
Wear safety gloves and sturdy
shoes.
Danger!
Never point the tool's nose at yourself,
other people or animals! Irrespective
of whether the tool is loaded with
fasteners or not. Fatality or serious
injury may be caused.
Danger, risk of explosion!
It is forbidden to use oxygen,
inflammable gases or bottled gases
as the source of energy for this tool.
The tool may explode and cause
serious injury or fatality.
Prior to using this tool, the user must become familiar with all features and safety instructions.
Overview Fig. I
1 Adjustable exhaust
2 Selectable trigger (single sequence actuation
mode / contact actuation mode)
3 Trigger lever
4 Driver depth of drive adjustment
5 Workpiece contact**
6 Catch**
7 Magazine clamp**
12
For your safety
Product features
8 Locking pin for magazine clamp**
9 Self-cleaning air filter*
10 No-mar pad with tow-nailing claw*
11 Magazine catch*
12 Nail length adjustment*
13 Magazine*
* DCN 3264
** DKN 3065 Kombi
Danger, risk of injury due to
malfunctions!
It is forbidden to make changes to the
tool or attachments. Such modifications
could result in injury or malfunctions.
Danger, risk of injury due to
falling!
Do not use the tool on ladders or
unstable platforms. Ensure you are
standing firmly.
Danger, risk of injury!
Do not leave tool unattended and
secure against unauthorised use.
Isolate the tool from the air supply on
leaving the workplace.
Caution
The tool is only allowed to be used at
the operating pressure stated. Never
connect the tool to compressors that
produce a pressure of more than
13.8 bar. Incorrect pressure will result
in malfunctions or damage to the
tool. (For recommended operating
pressure, see product specifications)