Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
12.
SAfETy NOTES
!
Never place the charger and connected batteries on combustible surfaces. Never use the charger
close to combustible materials or gases.
• Never open the device when connected to a live power source!
Do not leave the charger unattended during operation. The charger can heat up considerably
during normal operation.
Take particular care when handling battery packs with a large number of cells. Ensure good insula-
tion to prevent the risk of electric shock.
The Power Peak ® Quad EQ-BID is designed only for charging, discharging and equalizing rechar-
geable NC/NiMH/lead and lithium batteries. Due to the risk of explosion, do not use the charger to
charge dry batteries.
The charger is designed for operation only for 12V DC operation, therefore, never operate the char-
ger with a different voltage supply.
Ensure the cool openings are always clear to allow air to freely circulate.
Check for damage to the casing and leads.
Protect the charger from dust, dirt and moisture
Do not expose the charger to excessively low or high temperatures as well as direct sunlight.
Make sure the charger is not exposed to impact, pressure or excessive vibration load.
When not used for a long periods of time, unplug the charger from the power source and discon-
nect any batteries.
Do not charge rechargeable batteries twice in quick succession.
Do not charge batteries that are at a high temperature. Allow batteries to cool down to ambient
temperature.
Only cells of the same capacity and of the same make may be charged together.
Never charge two batteries connected in parallel to one output, connect only one rechargeable
battery pack at a time.
Ensure correct polarity of the battery and avoid short-circuits
Always take great care to check the settings on the Power Peak ® Quad EQ-BID. Incorrect
settings can damage the batteries beyond repair.
• Read the battery manufacturer's instructions and adhere to them strictly.
13.

GUARANTEE

Naturally all our products are guaranteed for 24 months as required by law. If you wish to make a
justified claim under guarantee, please contact your dealer in the first instance, as he is responsible
for the guarantee and for processing guarantee claims. During the guarantee period we will rectify any
functional defects, production faults or material flaws at no cost to you. We will not accept any further
claims, e.g. for consequential damage.
Goods must be sent to us with carriage pre-paid; we will pay return carriage costs. We will not accept
any packages sent without pre-paid postage.
We accept no liability for transport damage, nor for the loss of your shipment. We recommend that you
take out appropriate insurance.
Send your device to the approved Service Centre in your country.
The following requirements must be fulfilled before we can process your guarantee claim:
You must include proof of purchase (till receipt) with the returned product.
You must have operated the product in accordance with the operating instructions.
You must have used only the recommended power sources and genuine robbe accessories.
The unit must not exhibit damage caused by moisture, unauthorised intervention, reversed polarity,
overloading or mechanical stress.
Please include a concise, accurate description of the fault to help us locate the problem.
Operating Instructions
Power Peak ® Quad EQ-BID
22
Order No.
8565

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8565

Table des Matières