Set-Up Display; Settings In Manual Mode - ROBBE Power Peak QUAD EQ-BID Notice D'utilisation

+/-
Button
+/-
Button
+/-
Button

7.2 SET-UP DISPLAy

There is a separate Set-up menu with a corresponding screen display for each charge
7.3

SETTINGS IN MANUAL MODE

The following settings have to be entered manually before a charge or discharge process
can be started in manual mode; this ensures that the charger is able to work through the
process efficiently when in this mode:
• Battery memory
• Battery type
• Cell count
• Battery capacity (or battery voltage for LiPo, LiIo, LiFe and Pb)
• Charge current
• Discharge current
• Buzzer (OFF, 1-5)
Note: Only values in the first line can be changed when the arrow symbol is flashing.
Operating Instructions
Power Peak ® Quad EQ-BID
'ENTER'-
Button
'ENTER'-
Button
or discharge parameter. The parameter to be
changed is selected with the '+' or the '-' button. The
corresponding line is indicated by an arrow on the
right-hand display margin. The set-up procedure
is initiated by pressing ENTER. A '+' and a '-' sign
flash alternately on the right-hand screen margin.
A new value can be entered with the '+' or the '-'
button. Press ENTER to confirm the new setting.
The illustrated display sequence shows a typical
example of how the charging current is changed.
+/-
Button
12
Order No.
8565
'ENTER'-
Button