Schneider Airsystems FSP-W 400-1,3 Notice D'utilisation D'origine page 8

GB
FSP-W 400
Correct cleaning
Clean the inside of the paint spray gun as fol-
lows:
1. Unscrew the flow cup (item 05) and re-
move the filter (item 16).
2. Remove the air cap (item 06)
3. Remove the material cap and nozzle nee-
dle (see the section on changing paint
nozzles in part 2 and Fig. 3c of the in-
struction manual).
4. Use a large circular brush to clean the
supply channel (Fig. 3e), (Fig. 3f).
5. Use a smaller circular brush to clean the
hole in the air cap (Fig. 3d).
I/ 4
1.7 EC Declaration of Con-
formity
Paint spray gun
FSP-W 400-1,3
FSP-W 400-1,8
Year of CE mark: 2008:
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100, DIN EN 1953, BGR 500,
DIN 31000, DIN 31001 - 1,
94/9/EC, 98/37/EC (before 28.12.2009);
2006/42/EC (after 29.12.2009).
pp Marco Lodni
Head of Development/Testing
08.2008
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
Serial no.
T460018
T480036