Philips AZ 7381 Mode D'emploi page 14

OPERATION
ESA – Electronic Shock Absorption Memory
Press the ESA button to switch on/off ESA.
The ESA symbol lights up in the display.
y y
The ESA memory continuously stores in advance the CD
y y
data to be played. This is to prevent sound skipping
during play due to shock and vibration.
Prolonged shocks and vibrations may empty the ESA
y y
memory completely and CD play will be interrupted.
Note: When switching the ESA feature on and off, CD play will be delayed or
interrupted for a short time.
RESUME / HOLD
RESUME – playing from where you have stopped
1 Activate the RESUME feature by sliding the RESUME/HOLD
switch to the center setting.
2 If you stop CD play by pressing the STOP 9 button, the last
position played will be stored.
3 Press 2; to resume CD play from the position it was
stopped at.
HOLD – deactivating all buttons
Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.
Now all buttons are locked until you switch the feature off again. If you press a
y y
button (except OPEN), the display will indicate HOLD.
Note: - In the HOLD position, the RESUME function is automatically activated.
- Opening the lid erases the information about the last position played.
14