Velleman PROMIX300K Mode D'emploi page 2

• Familiarise yourself with the operation of the device before bringing it into service and do not allow operation by
unqualified individuals. Damage is usually caused by unprofessional operation of the device.
• Do not use spray cleaners to clean the faders and do not clean the device with abrasives or solvents. Use a clean and
damp cloth instead.
• Use the original packaging if the device is to be transported.
• Do not attempt to make adjustments or execute repairs. Consult a qualified technician instead.
• Removing the barcode will void the warranty.
• Use only high-quality cables in order to obtain the highest sound quality.
• You should only use the device for the applications described in this manual. Damage caused by unauthorised use
will automatically void the warranty and may lead to electroshocks, burns or short circuits.
• Connecting devices : put the power switch in the OFF position. Make sure the devices in question are also OFF. Place
the master control in the minimum position.
Remember to consult a qualified technician if necessary.
4. Front Panel Description (see figure below)
PROMIX300K
2
VELLEMAN