During Cooking; After Use - all-clad NC00113807-03 Guide De L'utilisateur

HIGH/LOW MODE
The auto HIGH/LOW setting starts the cooking on HIGH and then switches to LOW:
• Press Set three times to select the HIGH/LOW setting.
• Enter the cooking time on the HIGH setting by pressing down or up.
• Press Start.
• Enter the cooking time on the LOW setting.
• Press Start again to confirm the time on the LOW setting and start the cooking.

DURING COOKING

• You can change the cooking time by pressing up or down.
EN
• You can change the setting during cooking by pressing Set, on the HIGH or LOW settings only.
END OF COOKING
• When the cooking cycle is complete, the slow cooker will automatically shift to KEEP WARM mode.
• The WARM light illuminates.
• The KEEP WARM mode can be used for up to 6 hours.
• When the KEEP WARM mode is finished, the slow cooker will shut off.
• If you want to extend the KEEP WARM mode, push Power, press Set until the KEEP WARM mode appears
and press Start.
• DO NOT USE THIS FUNCTION TO REHEAT FOODS.

AFTER USE

• Press Power to turn off the slow cooker. The digital readout display 00:00 and light off after few seconds.
• Unplug your appliance.
9