Audio-Technica ATH-WS99BT Manuel D'utilisateur page 8

English
How to Connect
How to Perform Pairing
* Read the user manual for the Bluetooth device.
* Place the Bluetooth device within 1 meter of the headphones to perform pairing correctly.
* Wear the headphones to con rm pairing by listening for sound.
1
Starting with the headphones turned off, press and
hold the Power button on the Bluetooth
transmitter/receiver for about 2 seconds.
The indicator will begin ashing red/blue.
2
Pairing process will begin and the Bluetooth device will search for the headphones.
* For more information on how to use the Bluetooth device, read the operation manual for the
device.
3
When the headphones is searched for,
"ATH-WS99BT" will display on the Bluetooth
device. Select "ATH-WS99BT" and register the
device to be connected.
Some devices may ask for pass key*.
In this case, enter "0000".
* The pass key is also called pass code, PIN code, PIN
number or password.
4
When the headphones rings, the pairing has
performed normally and been successfully
completed.
8
Long
press
Beep (Pipo Papo)
sound
ON
Device
ATH-WS99BT
Select
Short beep
♪
♪