Maintenance - Chauvin Arnoux C.A 876 Notice De Fonctionnement

SK 6 P03652906 -50...+285°C
Flexible
Recommended for difficult-to-get-at measurement points
SK 7 Air P03652907 -50...+250°C
For ambient air temperature measurement. Thermocouple protected by
8.5 mm Ø shield
SK 8
For pipes P03652908 -50...+140°C
Self-gripping
The thermocouple is located on a copper sheet at the end of a double-
sided velcro tape that wraps around the pipe, ensuring good contact.
SK 19 P03652922 -50...+200°C
Magnetic
'Automatic' mounting on metal surfaces thanks to magnet
Extension leads with grips
Model Reference
CK 1 P03652909*
Extension lead
Ended with male/female connectors
CK 2 P03652910*
Extension lead
Ended with male connector / 2 bare wires
CK 3 P03652913*
Extension lead
Ended by DIN 5-pin socket / female connector
CK 4 P03652914*
Extension lead
Ended by 2 banana plugs/ female connector
PP 1 P03652712*
Hand grip
Compatible with extension leads CK 1 to CK 4
*
Extension leads can withstand temperatures : -40...+100 °C

7. MAINTENANCE

Use only factory specified spare parts for maintenance. The manufacturer
will not be held responsible for any accident, incident, or malfunction
following a repair done other than by its Service Center or by an approved
repair center.
7.1 Battery replacement
A standard 9-volt battery supplies power. (NEDA 1604, IEC 6F22).
The appears on the LCD display when replacement is needed.
To replace the battery:
Turn the Thermometer OFF
G
1s/contact
Ø 1 - L = 1000
3 s in
ambient air
5 s Ø 5 - L = 150
10 s on
12 mm Ø 10 ≤ Ø ≤ 90
stainless pipe
7 s Ø 14 - L = 1000
Diameter Length
4 mm 1 m
4 mm 1 m
4 mm 1 m
4 mm 1 m
- 11 cm
21