Connecting Devices - Sennheiser AC 32000-II Notice D'emploi

Putting the AC 3200-II into operation

Connecting devices

Connecting the antenna
CAUTION
Danger of damage to the devices!
Do not daisy-chain several AC 3200-II. Do
AC 3200-II.
Never connect the AC 3200-II to other active combiners.
Only connect suitable antennas to the output of the AC 3200-II.
The AC 3200-II active transmitter combiner can be used with either the A 2003 UHF
directional antenna, the A 1031 U omni-directional antenna or the A 5000 CP
circularly polarized UHF antenna. The antenna transmits the signals of all connected
transmitters (see page 11).
The signals are combined onto the antenna output with no distribution attenuation.
To connect an antenna:
Connect the antenna using a low-attenuation 50-Ω coaxial cable.
Connect the coaxial cable to the antenna output 8.
not connect other active combiners to the
AC 3200-II | 9