Electrolux EJF3310AOX Notice D'utilisation page 17

A
WARNING!
Connect it to the power socket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the
reversibility of the doors at your cost.
WARNING!
After having reversed the opening
direction of the doors check that all
the screws are properly tightened
and that the magnetic seal adheres
to the cabinet.
If the ambient temperature is cold
(i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that
case, wait for the natural fitting of
the gasket. Lay down the appli-
ance back side down.
e
A
f
Remove the lower door.
Remove with a tool the cover (f), unscrew
the lower hinge pivot (e) using a 10 mm
spanner and re-screw it on the opposite
side.
Install the cover (f) on the opposite side.
Insert the pivot pin of the central hinge in
left hole of the lower door and fix the hinge
with the spacers.
Install the upper door on pivot pin of the
central hinge.
Install the upper hinge in the opposite side.
Insert the lower door on the pivot of the
lower hinge (e).
Remove the covers (if foreseen), unscrew
the handle. On the opposite side remove
the hole covers. Fix the handle on the op-
posite side together with the covers. Insert
the plastic plugs into the holes left open
that can be found in the instruction for use
bag.
ENGLISH 17