Cameo UNICON Manuel D'utilisation page 20

List of submenu items with explanations (confirm after editing):
RJ45 Wire
Pair
ReadOut
Hexadecimal
SD card
format
Identify
Default
Device Off
Timer
1 min – 30 min Switch UNICON off after 1 – 30 minutes without input
LCD Bright- 1% - 100%
ness
LCD Off
Timer
1 min – 30 min Switch off the display after 1 – 30 minutes without input
Service
UNICON SYSTEM INFORMATION (Info)
In the main menu, select Info and confirm. The firmware version and battery status of the UNICON
are now displayed.
20
1 Route the DMX universe of the UNICON to one of the 4 wire
pairs of the RJ45 interface
2
3
4
Percent Display of values in the menu items DMX Test and DMX Re-
ceive in percent, in decimal or hexadecimal system (decimal
Decimal
/ hexadecimal)
NO Do not format micro SD card
YES Format micro SD card
OFF The Identify function of all connected RDM devices is deac-
tivated
ON
The Identify function of all connected RDM devices is acti-
vated, a spotlight selected in the RDM/Fixture menu item
flashes to identify
OFF Deactivate automatic power-off of UNICON
Display brightness
OFF Automatic power-off of display disabled
0–255 For service purposes only