Cameo UNICON Manuel D'utilisation page 17

DMX TESTER – SAVE SCENE (DMX Test – Store Scene)
Four individual scenes with up to 10 steps each can be created, saved and retrieved in UNICON.
In the main menu, select DMX Test, confirm the selection, then select Store Scene and confirm
again. Now select the scene you want to edit and confirm the selection (Scene 1 – Scene 4). The
submenu for editing the corresponding scene is now displayed.
List of submenu items with explanations (confirm after editing):
Channel Edit Channel 1 – 512
level 000 – 255
Fade Time: 0.0s – 30.0s
Hold Time: 0.0s – 30.0s
Current Step:
Max Steps:
Clean Step
Clean scene
DMX TESTER – RUN SCENE (DMX Test – Execute Scene)
In the main menu, select DMX Test, confirm the selection, then select Execute Scene and con-
firm again. Now select the scene to be executed and confirm the selection (Scene 1 – Scene 4).
Select channels and set corresponding values from 000 to
255 in the selected step
Set the fade time of the selected step from 0.0 seconds to
30.0 seconds
Set the duration of the selected step from 0.0 seconds to
30.0 seconds
1 - 10 Selection of the step to be processed (number of steps
depending on the maximum number of steps under Point
Max Steps)
1 - 10 Set the maximum number of steps from 1 to 10
NO Cancel selected step
YES Reset selected step
NO Cancel selected scene
YES Reset selected scene
17