Cameo UNICON Manuel D'utilisation page 16

Label
In the RDM/Fixture menu, select Label and confirm the selection to individually name the RDM
device.
DMX TESTER – MANUAL (DMX Test – Manual)
Connect the UNICON to a DMX device via DMX cable to check the functions. These can be control-
led via DMX. For this purpose, any values from 000 to 255 can be transmitted manually on all 512
channels.
In the main menu, select DMX Test, confirm the selection, then select Manual and confirm again.
The DMX channels with DMX values are now displayed. Select the desired channel, confirm the
selection, set the value as desired and confirm the entry. All values are reset to 000 the next time
the UNICON is restarted.
16
Select character or command:
Restore label after last backup:
Set space:
Delete positions from cursor:
Save label:
Confirm command or character
and select the next digit:
 or  or turn the
encoder
Reset
Space
Clean
Save

or press encoder