Cameo UNICON Manuel D'utilisation page 13

The UNICON remote unit has both a touch display and a rotary-push encoder with an
additional BACK key. Both operating elements provide full access to all unit options.
7 TOUCH DISPLAY
Illuminated touch colour display. Navigate in the main menu and sub-menus by using the pressu-
re-sensitive buttons (up), (down), (back) and (confirm). Change the numerical value or status in
a menu item using the  and  buttons, confirm the change by pressing
8 ROTARY-PUSH ENCODER
Rotary-push encoder for navigating in the main menu and sub-menus, adjusting system settings
and changing numerical values and status in the corresponding menu items. Select the individual
menu items in the main menu and in the sub-menus by turning the encoder and confirm the se-
lection by pressing the encoder. Change the numerical value or status in a menu item by turning
the encoder and confirm the change by pressing the encoder.
9 BACK
A. Press BACK briefly to switch on the device and for about 2 seconds to switch it off.
B. Press BACK to go up one level in the menu structure.
7
9
8

.
13