Cameo UNICON Manuel D'utilisation page 18

RECEIVE DMX SIGNALS (DMX Receive)
Cameo UNICON provides the option of checking whether a connected DMX device is transmitting
DMX signals and which DMX values are present on the corresponding DMX channels. In the main
menu, select DMX Receive and confirm.
Further information is displayed in the upper area of the display, see table.
Rate: xHz
Percent Display of values in percent, deci-
mal or hexadecimal system
(Decimal / Hexadecimal)
UPDATE DEVICE (Update Fixture)
The Cameo UNICON offers the option of updating compatible Cameo DMX devices via network or
DMX cables. Save the corresponding update file on a micro SD card and insert it into the micro SD
card reader on the back.
In the main menu, select Update Fixture and confirm.
18
Display of the
transfer rate in Hertz
Start xx
code:
Signal:
Display of the start
code
DMX signal is present
no DMX signal