Livington PRIME Mode D'emploi page 17

5. Open the water tank as illustrated below (illustration 4), fill it as far as the maximum upper edge with water, then reinsert it in the
appliance. Check that the water tank is securely placed in the appliance.
Please Note: You may use tap water in the Livington Prime Steam Mop. In areas with hard water, we recommend the use of distilled
water for a better performance.
6. Insert the power cable plug into an earthed socket and press the main switch to turn the appliance on.
Use of the Flexible Function
To use the flexible function, manipulate the flexible mechanism to bring the steam cleaner to another angle. You will be able to reach
and clean particular spots, such as the floor underneath your sofa, easily. Illustration 5.
Carpet Gliders: When using the Livington Prime Steam Mop on carpet surfaces: Place the mop-top with mounted micro-fibre cloth
on the carpet gliders, as shown in (illustration 6).
Please Note: Never remove or install accessories while the appliance is in operation. Do not use the Livington Prime Steam Mop
on carpet surfaces witout the carpet gliders. Never use the carpet gliders on surfaces that are prone to scratches. Verwendung des
Livington Prime Steam Mop
USING THE LIVINGTON PRIME STEAM MOP
With the Livington Prime Steam Mop, floor surfaces such as, marble, ceramic, carpet, stone, linoleum, sealed hardwood floors and
parquet can be cleaned.
Please Note: This product emits damp and creates humidity. Water marks, stains or damage can appear on floors if the appliance is
operated on one spot for too long.
• Do not use the appliance on untreated floors and do not leave it to stand for long periods of time on wood or heat-sensitive surfaces. This
could cause the wood grain to rise, as well as other types of damage.
• Take particular care when using the appliance on vinyl, linoleum or other heat-sensitive floors. Too much heat can lead to the melting
of adhesive in the floor. Only use the appliance on laminated floors that have been professionally laid and exhibit no cracks or gaps that
would allow dampness to enter.
• Test the Livington Prime Steam Mop on a small, isolated part of your floor surface before using it extensively over the whole area.
• Only use the carpet gliders on carpet surfaces or carpet rugs. The use of the carpet gliders on all other floor surfaces may possibly lead to
streaks or scratches.
1. Fill the water tank with water. Replace the water tank covering. Ensure that the copper cone in the water tank (illustr.7) is always
completely submerged in water during operation.
Please Note: In isolated cases the visible hose in the water tank can bend into a kink. This impairs operation. Please eliminate the kink from
the hose.
TIPP: For an especially fresh aroma when cleaning, we recommend the use of Livington Steam Fragrance. This is available as an
alternative accessory. It is particularly suitable for households with animals. Simply add 2 to 3 squirts to the Livington Prime Steam
Mop water reservoir.
2. Insert the mains plug into an earthed socket. Activate the power-on button and the indicator light will switch on.
3. The Livington Prime Steam Mop has Opti Steam Technology; that means for you, regardless of which attachment or surface you are
working with, the Livington Prime Steam Mop always operates at the ideal temperature or optimal steam emission. Please note that the
appliance may drip on initial operation until reaching the ideal temperature. This is no malfunction, just a normal process when heating
up. To stop steam emission, turn the appliance off with the aid of the on/off switch.
TIP: The Livington Steam Mop is ideally suited to the cleaning of all hardwood floors, such as linoleum, ceramic, marble, wood etc.
Ideal for the cleaning of carpets and rugs, bathrooms, kitchens, window sills, car wheels etc.
4. Move the appliance slowly over the surface to be cleaned. The absorbent mop soaks up the dirt that has been dissolved by the
steam. Use the steam generously. Keep a hand towel ready to wipe away any excess water that may accumulate.
5. As soon as the Livington Prime Steam Mop stops emitting steam, refill the water container for further cleaning and resume
cleaning or deactivate the appliance and end the cleaning process. The Livington Prime Steam Mop has the option of filling up
the tank while in activated mode, as it has an automatic water system at its disposal which stops the steam process as soon as the
tank is empty.
6. Make sure that the appliance is SWITCHED OFF after each time of use and the mains plug has been removed from the socket, so
that it is completely SWITCHED OFF before the next time of use.
TIP: The mop stands by itself, by letting the shaft engage forwards.
Please Note:
• Never use the appliance for too long on one spot. This can damage the surface of the floor. Never put your hands or feet unter the
mop. The appliance gets very hot.
• When the mop is operating, a pulsating sound may be heard. This is an entirely normal operating sound and means that the mop is
producing steam. It is possible that some small drips of water are emitted along with the steam. This is also entirely normal.
• The power and temperature of the steam can impair some materials negatively. Therefore, always test the mop first on a visible spot
M16625_M17378_Livington PrimeSteamMop_Manual_A5_20181023_BA.indd 17
17
23.10.18 12:18