Livington PRIME Mode D'emploi page 16

without footwear.
• Do not put any objects into the openings of the appliance.
• Only use the mop-head if the base cloth is properly attached.
• Do not use if the water tank is empty.
• Apply particular care when using on stairs.
• Store your Livington Prime Steam Mop in a cool and dry place.
• Keep your working area well-illuminated.
• Never pour hot water or other fluids, such as alcohol-based fluids or cleaning detergents
into the Livington Prime Steam Mop' s water tank. This can make handling unsafe and
damage the appliance.
• Always keep the steam outlet free. Keep all openings free of fluff, hairs or other possible
obstructions, to ensure a flawless steam flow.
• Only use manufacturer recommended accessories.
• The use of accessories not supplied or sold by the manufacturer, can cause fires, electric
shocks or injuries.
• Fluid or steam should not be aimed in the direction of appliances that contain electrical
components, such as the interior of ovens.
• Do not expose to the rain.
• Do not use the Livington Prime Steam Mop if you notice a water leak; get in touch with a
qualified technician.
• Do not use the Livington Prime Steam Mop in confined spaces in which there is air
containing inflammable, explosive or toxic fumes, such as thinners or oil-based paint.
• Do not use on leather, wax-polished furniture or floors, unsealed hardwood or parquet
floors, synthetic fibres, velvet or other delicate, water-steam sensitive materials.
• Remove the appliance' s plug from the socket prior to servicing works.
• Do not touch the hot surfaces.
• Do not place on or in the vicinity of gas or electric burners or in hot ovens.
• Only use the appliance for its intended purpose.
• Due to the emission of steam, caution is required when using the appliance.
• To avoid overloading of the power circuit, do not operate any other appliance on the same
connector (power circuit) as the steam cleaner.
OPERATION
Prior to first time use, remove all labels, protective foils or wrapping.
ASSEMBLING THE LIVINGTON PRIME STEAM MOP
WARNING: Ensure that the appliance is unplugged before assembling the appliance or replacing an accessory.
1. Slide the lower end of the main element into the Mop-swivel joint until it snaps into place.
2. Insert the extension tube 2 into the body of the appliance, as seen in Illustration 1.
3. Place the micro-fibre cloth over the mop head and tighten the cloth onto the loop until it rests securely on the mop head
(illustration 2).
4. Press the water tank release knob and remove it with gentle pressure from the body of the appliance (illustration 3)
16
M16625_M17378_Livington PrimeSteamMop_Manual_A5_20181023_BA.indd 16 23.10.18 12:18