Maintenance; Maintenance Plan; Cleaning - Zipper Maschinen ZI-STE1100IV Manuel D'utilisation

12

MAINTENANCE

Shut off the machine and let it cool down before start servicing!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly recommend
following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
12.1

Maintenance plan

Servicing period
Engine oil Inspection
(15W40)
Change
Inspection
Air filter
Change
Inspection
Spark plug
Change
Fuel tank / fuel Inspection
filter
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified hours of
operation (HOO) have expired.
12.2

Cleaning


We recommend cleaning the machine immediately after each use.

Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible

Wipe the equipment with a moist cloth and some soft soap or blow it with compressed air at low pressure.
Do not use cleaning agents or solvents; these could attack the plastic parts of the machine!
ZIPPER MASCHINEN GmbH
ZI-STE1100IV
W A R N I N G
No cleaning, upkeep, checks or maintenance when machine is running!
Before
any using
X
X
www.Zipper-Maschinen.at
N O T I C E
After: After:
1 month 3 month
5 HOO 25 HOO
X
N O T I C E
MAINTENANCE
After: After:
6 month 12 month
100 HOO
50 HOO
X
X
X
X
After:
25 month
250 HOO
X
26