Maintenance; Maintenance Plan; Cleaning - Zipper Maschinen ZI-STE2800IV Mode D'emploi

13

MAINTENANCE

No cleaning, upkeep, checks or maintenance when machine is running!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.

13.1 Maintenance plan

Servicing period
Engine oil Inspection
(15W40)
Change
Air filter Inspection
Change
Spark plug Inspection
Change
Fuel tank / Inspection
fuel filter
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified
hours of operation (HOO) have expired.

13.2 Cleaning

 We recommend cleaning the machine immediately after each use.
 Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible
 Wipe the equipment with a moist cloth and some soft soap or blow it with compressed air at low
pressure.
Do not use cleaning agents or solvents; these could attack the plastic parts of the machine!
ZIPPER MASCHINEN GmbH
ZI-STE2800IV
Shut off the machine and let it cool down before start servicing!
Before
any
using
X
X
X
www.Zipper-Maschinen.at
A T T E N T I O N
N O T I C E
After: After:
1 month 3 month
5 HOO 25 HOO
X
N O T I C E
MAINTENANCE
After: After:
6 month 12 month
100 HOO
50 HOO
X
X
X
X
After:
25 month
250 HOO
X
22