Canon DR-5020 Mode D'emploi page 54

2
Select the following settings on the operation panel.
This setup is not required if it has already been made in the application.
Text/Picture
[Text]: This is lighting, when scanning
the text documents (including
mostly characters) with black
and white mode.
[Picture]: This is lighting, when scanning
the picture documents including
photographs with black and
white error diffusion mode.
If any applications are set with gray scale
mode or color mode for the image
selection, either of above will not be
lighting.
For details on other setup parameters, see "3.3 Setting Scan Conditions." (P.58)
MEMO
3
Load one page of the document you are going to scan, and set the
paper guides for the width of the document.
4
Instruct scanning in the application.
Simplex/Duplex
[Simplex]: Select this when scanning
[Duplex]:
A
Brightness keys
Set the brightness when the document is
scanned.
To automatically adjust the brightness,
Semi-Auto Auto Manual
press A key to light A .
Feeding Option
To manually adjust the brightness, press
or
above the key and adjust the brightness.
Count Only
New File
3.2 Document Feeding and scanning
only one side of the document.
Select this when scanning
both sides of the document.
keys to move the indicator display
51